DRX Error cards

[Pokeplayer101]

I went to my pre-release today and I got like 15 Error cards. These are the ones I got.

Skiploom (Square Cut- #2)
Roserade RH (Square Cut- #15)
Throh (Square Cut- #68)
Gabite (Square Cut- #88)
Altaria (Square Cut- #84)
Giant Cape (Square Cut- #114)
Hydreigon (Square Cut- #98)
Marowak (Square Cut- #61)
Walrein (Miscut, Has a little yellow border cut off on the left bottom corner, Square Cut- #31)
Gabite (Miscut, and Square Cut- #89)
Roggenrola (Has some Yellow Border Cut off on bottom right corner- #65)
Drifloon (Has some Yellow border cut off on bottom right corner- #49)
Houndour (Has some Yellow Border cut off on bottom Right corner and on top left corner- #74)

So then I started thinking, are Error cards rarer or the same pull rate. And are they worth anymore? Did you pull anything like this?

I really encourage you to look through all your DRX cards to see if you have any.

[Vablakes]

I second him in saying that you should look through. I originally discovered this error, and posted about it on Pokebeach. I have a low quality video of it on my Youtube. I only got rares and 1 uncommon miscut, but the miscuts I got were all square cut. They were:
Bad Hydreigon
Bad Garchomp
2 Jumpluff
Probopass
Claydol
Honchkrow
Walrein
Marowak
Stunfisk

I think they are considerably more rare than the regular ones. There were only 36 packs at my prerelease that could have contained them, and with EXs and holos, there were probably only around 25 out of 6 boxes, because only one box had that error.

[KazamBolt]

Those aren't errors, they're just printing errors. Completely different. Not worth really anything.

[Pokeplayer101]

Originally Posted by KazamBolt

Those aren't errors, they're just printing errors. Completely different. Not worth really anything.

How could they not be worth more than the original price? They are more rare than normal. And you don't get them in every box?

[Vablakes]

Originally Posted by KazamBolt

Those aren't errors, they're just printing errors. Completely different. Not worth really anything.

How are they printing errors if the corners aren't round? The printer made the corners square?

Edit: What the face happened? That was dumb.

[PokemonTrader]

I'm thinking $1 each at most, since they aren't really that rare/significant..............

vablakes, you stole my post here :P

[Vablakes]

What the heck happened? That has never happened to me before. Failure.

[KazamBolt]

Not even close to $1. These things are incredibly common, and have seemed to happen more and more the past few sets. I'd say they add 5-10% to the card's value, 20% tops. When you're talking about a common/uncommon, that's just a few cents.

Anyways, I misspoke. It's not really a printing error, but a cutting error. Still, it's not an "error" like the Monster Ball Voltorb or the Normal Type Reverse Dialga in Platinum.

[Daelum]

For miscuts, it would have to be missing like a whole border or have extra card art or missing card art.

For square cuts, it would have to be near perfect square cuts, not just more square than round.

Miscuts, if noticeable, tend to go for more the crazier the miscut. Square cuts don't really go for much more, unless it's like a Base Set Holo or Ultra Rare, but even then, square cuts only go a bit more and only to the right collector