Anyone else have problems with scratched Red Gyarados? We have pulled 2 reverse Red Gyarados and both have similar horizontal scratches that are really straight/even and look like manufacture / packing damage.
:frown:
Anyone else have problems with scratched Red Gyarados? We have pulled 2 reverse Red Gyarados and both have similar horizontal scratches that are really straight/even and look like manufacture / packing damage.
:frown:
If it is a straight line that is from the machines, it is considered by many to be Mint. I wouldn't worry too much about it.
Drew
Are you reffering to scratches on the card like this
__________
___________
________
_______
If so, then that comes on some RH's from HGSS when you pull other cards from the pack and they scratch up and rub up against the RH in the pack. I got those scratches, not on my Red Gyrados, but on my RH mareep, and RH Chansey.
Are you sure it's a scratch as opposed to an "edge" of the foil pattern layer?
I'll try and get some scans of ours. We pulled two RH Gyarados and they are both flawed prints on the foil pattern, with lines that run from side to side, I believe they are vertical print lines. Most all of our foils were perfect but a few had this print error.Anyone else have problems with scratched Red Gyarados? We have pulled 2 reverse Red Gyarados and both have similar horizontal scratches that are really straight/even and look like manufacture / packing damage.
:frown:
I bought an SP Deck (The one with Rhyperior 4) and it had A LARGE STICKY fingerprint on it. (Not even open either!) Which was really weird. Lucky I was able to get some of it off but still HOW?
I think that qwachansey is goingto have a problem with that...